Image Width (pixels):
| Analyzed File: | Soporte.ipt |
| Autodesk Inventor Version: | 2022 (Build 260153000, 153) |
| Creation Date: | 15/10/2021, 13:17 |
| Study Author: | Andres |
| Summary: |
General objective and settings:
Design Objective Single Point Study Type Static Analysis Last Modification Date 15/10/2021, 13:14 Model State Master Detect and Eliminate Rigid Body Modes No iProperties
Summary
Author Andres Project
Part Number SOPORTE BASE Designer Andres Cost S/0.00 Date Created 20/09/2021 Status
Design Status WorkInProgress Physical
Material Aluminum 6061 Density 2.7 g/cm^3 Mass 2.1114 kg Area 79500.8 mm^2 Volume 782002 mm^3 Center of Gravity x=-0.000000000741632 mm
y=-21.2103 mm
z=-3.86175 mmNote: Physical values could be different from Physical values used by FEA reported below.
Mesh settings:
Avg. Element Size (fraction of model diameter) 0.1 Min. Element Size (fraction of avg. size) 0.2 Grading Factor 1.5 Max. Turn Angle 60 deg Create Curved Mesh Elements Yes Material(s)
Name Aluminum 6061 General Mass Density 2.7 g/cm^3 Yield Strength 275 MPa Ultimate Tensile Strength 310 MPa Stress Young's Modulus 68.9 GPa Poisson's Ratio 0.33 ul Shear Modulus 25.9023 GPa Part Name(s) Soporte base.ipt Operating conditions
Force:1
Load Type Force Magnitude 2943.000 N Vector X 0.000 N Vector Y -2943.000 N Vector Z 0.000 N Selected Face(s)
Fixed Constraint:1
Constraint Type Fixed Constraint Selected Face(s)
Results
Reaction Force and Moment on Constraints
Constraint Name Reaction Force Reaction Moment Magnitude Component (X,Y,Z) Magnitude Component (X,Y,Z) Fixed Constraint:1 2943 N 0 N 14.5078 N m -14.5078 N m 2943 N 0 N m 0 N 0 N m Result Summary
Name Minimum Maximum Volume 782002 mm^3 Mass 2.1114 kg Von Mises Stress 0.000869584 MPa 27.7229 MPa Displacement 0 mm 0.00196154 mm Safety Factor 9.91959 ul 15 ul Stress XX -3.6012 MPa 25.7962 MPa Stress XY -15.2027 MPa 15.0703 MPa Stress XZ -7.74547 MPa 7.54624 MPa Stress YY -10.6129 MPa 24.6391 MPa Stress YZ -14.6214 MPa 15.1295 MPa Stress ZZ -3.79081 MPa 24.4556 MPa X Displacement -0.000725496 mm 0.000732005 mm Y Displacement -0.00194664 mm 0.00017271 mm Z Displacement -0.00072018 mm 0.000716555 mm Equivalent Strain 0.0000000125003 ul 0.00036933 ul 1st Principal Strain 0.000000000199084 ul 0.000405901 ul 3rd Principal Strain -0.000202134 ul -0.00000000457159 ul Strain XX -0.000115747 ul 0.00030355 ul Strain XY -0.000293462 ul 0.000290908 ul Strain XZ -0.000149513 ul 0.000145668 ul Strain YY -0.000165143 ul 0.000299279 ul Strain YZ -0.000282243 ul 0.000292049 ul Strain ZZ -0.000115742 ul 0.000294303 ul Figures
Von Mises Stress
Displacement
Safety Factor
Stress XX
Stress XY
Stress XZ
Stress YY
Stress YZ
Stress ZZ
X Displacement
Y Displacement
Z Displacement
Equivalent Strain
1st Principal Strain
3rd Principal Strain
Strain XX
Strain XY
Strain XZ
Strain YY
Strain YZ
Strain ZZ
D:\Documentos\15.PUCP_2021-2\[PDM] Proyecto de Diseño Mecatrónico\ProyectoGIT\ProyectoRobotPallet\SistemaDeElevacion\version2\Soporte.ipt
Image Width (pixels):
